REVERSED GRID

[Kevin Pheiffer]

Maybe this has been asked before, just can't find it. LOL

Can I reverse the grid in online races? For race 2, I mean.
Thanks guys.

 

[alexSchmurtz]

I think it is not possible… yet! Not sure where I've seen it but Reiza wants to add more race options like this, it's on their to do list!

 

[Dethrone1427]

Reverse grids and performance ballast would be most dope

 

[Augusto Dufloth]

We are using reverse grid AND ballast penalty in our current stock car v8 championship.

You need to change the settings in the host server. Ballast you add as a batch.

 

[Kevin Pheiffer]

What settings?

 

[Will Mazeo]

I think it's MULTI Num Race Sessions="2", idk, we've being doing it in EEC since forever but I wasn't the one responsible to change this setting from race to race so I could be mistaken
For ballast use rFactor Admin Automation
This stuff should be build natively for AMS tho, to the guys working for Reiza adding a plugin for this stuff should be a piece of cake

 

[Maiquel Nunes]

[QUOTE = "Augusto Dufloth, post: 2245699, membro: 208209"] Estamos usando grelha invertida E pena de lastro na nossa atual v8 campeonato de stock car.

Você precisa mudar as configurações no servidor host. Lastro você adicionar como um lote. [/ QUOTE]
Could inform how does the reverse grid and lot of ballast?

 

[Patrick Giranthon]

We are using reverse grid AND ballast penalty in our current stock car v8 championship.

You need to change the settings in the host server. Ballast you add as a batch.

You can also use a batch for reversing the grid, in case you want to reverse only some poeple.
Use editgrid little software for this.

 

[led00m]

You can also use a batch for reversing the grid, in case you want to reverse only some poeple.
Use editgrid little software for this.

How do you do ballast exactly?

 

[Patrick Giranthon]

With a command like /setmass drivername kg if I remember well.
Perhaps you can use a file.ini too, putting into it all the lines needed for all drivers and launching it with /batch file.ini

You have to be admin to type these commands.
It is rf legacy so you can find infos easily on the net

 

[led00m]

With a command like /setmass drivername kg if I remember well.
Perhaps you can use a file.ini too, putting into it all the lines needed for all drivers and launching it with /batch file.ini

You have to be admin to type these commands.
It is rf legacy so you can find infos easily on the net

Thanks @Patrick Giranthon! On that note, we know that race 2 is reverse, does anyone know how the race 3 grid is generated?

 

[alexSchmurtz]

@led00m Race 3 grid corresponds to the standings of race 1. You're lucky, we just did 3 races series last sunday…