Apps Download removed [Deleted]

[Wotever]

I am going to try thsi as well but there is a specific setting in AC advanced which is Kerb related

might be worth trying to alter it and see what response you get from the bass shakers?

Kerb

This is the only "Canned" effect. It will vibrate the wheel when going over kerbs, but, it will vibrate the wheel even if going over a flat kerb. Understand, your wheel should already vibrate when going over a kerb even with this at 0.

I fear that it will be only sent to the wheel but not be reproduced in the suspension telemetry.

 

[Chimaera]

Is there a way to export/import Arduino LED layouts, screens etc?

 

[Wotever]

Is there a way to export/import Arduino LED layouts, screens etc?

It's not possible on screens yet, but you can on leds :

 

[Chimaera]

It's not possible on screens yet, but you can on leds :
View attachment 300273

oh yeah, I didn't go deep enough when looking for it. Thanks!

 

[nolive721]

I fear that it will be only sent to the wheel but not be reproduced in the suspension telemetry.

did some runs on different cars and tracks.and indeed, any change to Kerb setting in AC FFB screen only results in variations to perception in the wheel, no effect on bass shaker output

 

[evolaco]

Here is a sample of the problem of changing two pages quickly, does this have a solution? there's no way you can not press twice in a row? to leave 1 second of time for example, is there some parameter in the nextion code of the arduino or is it controlled only by simhub?

original template and sketch

 

[Wotever]

Here is a sample of the problem of changing two pages quickly, does this have a solution? there's no way you can not press twice in a row? to leave 1 second of time for example, is there some parameter in the nextion code of the arduino or is it controlled only by simhub?

original template and sketch

Hi ! I need to look deeper in it, I'm afraid I'm leaving home for a week today and preparations took most of my time. I need a bit of time ahead to test that, as soon as I come back I will look

 

[evolaco]

Hi ! I need to look deeper in it, I'm afraid I'm leaving home for a week today and preparations took most of my time. I need a bit of time ahead to test that, as soon as I come back I will look

thanks, a mode of pressing that makes a wait of 1 second until you leave it to change the page again it would solve it, but I think it can only be done from simhub, in arduino I do not see anything about the pulsations to change pages

 

[Dan Costa]

doesn't seem like the bass shaker is working well with ACC. Somethings work (gear changes, rpm) but other don't (Front right, left, Rear right, left)

 

[Wotever]

doesn't seem like the bass shaker is working well with ACC. Somethings work (gear changes, rpm) but other don't (Front right, left, Rear right, left)

Yeah they removed pretty every useful data in the last hotfix @nolive721 Asked on the official forum, we are waiting for a response : https://www.assettocorsa.net/forum/...t-bass-shakers-and-simhub.56076/#post-1037992)
In the wait i've updated the last beta using the new shakeit engine on discord to make it use fallback data (yaw pitch roll ...): https://www.racedepartment.com/threads/simhub-diy-sim-racing-dash.121578/page-295#post-2949094 it's not as precise, but it's better than nothing

 

[Wotever]

thanks, a mode of pressing that makes a wait of 1 second until you leave it to change the page again it would solve it, but I think it can only be done from simhub, in arduino I do not see anything about the pulsations to change pages

I just took a look, I have a robust page changing, could it be possible that your controller have ghosts inputs (very close button press) I'm using the same template from the last update (using hmijmap files) and stock arduino sketch on arduino micro.
I will try to add an additional debouncing for safety as it should not make it crash, but I guess it's the root cause. Do you have the log files ? Page changing and timings are logged so it would be easy to see it. (Log files are available in C:\Program Files (x86)\SimHub\Logs)

 

[evolaco]

I just took a look, I have a robust page changing, could it be possible that your controller have ghosts inputs (very close button press) I'm using the same template from the last update (using hmijmap files) and stock arduino sketch on arduino micro.
I will try to add an additional debouncing for safety as it should not make it crash, but I guess it's the root cause. Do you have the log files ? Page changing and timings are logged so it would be easy to see it. (Log files are available in C:\Program Files (x86)\SimHub\Logs)

this?
[2019-04-07 16:52:41,401] INFO - Starting SimHub v6.7.7 (build time : 20/03/2019 10:29:16)
[2019-04-07 16:52:41,408] INFO - Administrator privileges : True
[2019-04-07 16:52:41,412] INFO - OS version : Microsoft Windows NT 6.2.9200.0, Windows 10.0.17134
[2019-04-07 16:52:41,412] INFO - Donator License status : Licensed
[2019-04-07 16:52:41,412] INFO - Process priority : Normal
[2019-04-07 16:52:42,954] INFO - (Re)Starting AssettoCorsa Game Manager and plugin manager
[2019-04-07 16:52:42,959] INFO - Creating Assetto Corsa game manager (ACSharedMemory.ACManager)
[2019-04-07 16:52:42,979] INFO - AssettoCorsa game manager created
[2019-04-07 16:52:42,980] INFO - Creating plugin manager
[2019-04-07 16:52:43,560] INFO - Loading font list
[2019-04-07 16:52:43,979] INFO - AC shared memory connected
[2019-04-07 16:52:44,025] INFO - Starting Arduino in Single USB mode
[2019-04-07 16:52:44,051] INFO - Matrix custom font SQUARE-LARGE8x8 loaded
[2019-04-07 16:52:44,142] INFO - Web suggested IP :192.168.1.2
[2019-04-07 16:52:44,151] INFO - Font list loading successful
[2019-04-07 16:52:44,186] INFO - Web font-faces up to date
[2019-04-07 16:52:44,187] INFO - Loading plugins controls
[2019-04-07 16:52:45,086] INFO - AC process found
[2019-04-07 16:52:45,101] INFO - Game successfully loaded
[2019-04-07 16:52:45,170] INFO - Game connected
[2019-04-07 16:52:45,284] INFO - All time best found : 00:04:33.2560000 recorded at 4/6/2019 8:42:22 PM
[2019-04-07 16:52:45,556] INFO - USBD480 : Found 0 display(s)
[2019-04-07 16:52:45,575] INFO - Loading Nextion mapping data file NextionTemplate\DASH_4.3599XX.HMISTRUCT
[2019-04-07 16:52:45,635] WARN - Unable to find page virtmessage for role attribution in nextion definition
[2019-04-07 16:52:45,636] WARN - Unable to find page gamevolumechanged for role attribution in nextion definition
[2019-04-07 16:52:45,636] WARN - Unable to find page sessionstarted for role attribution in nextion definition
[2019-04-07 16:52:45,636] WARN - Unable to find page rpmalerttriggerchanged for role attribution in nextion definition
[2019-04-07 16:52:45,636] WARN - Unable to find page newlap for role attribution in nextion definition
[2019-04-07 16:52:45,636] WARN - Unable to find page sessionbestlap for role attribution in nextion definition
[2019-04-07 16:52:45,636] WARN - Unable to find page alltimebestlap for role attribution in nextion definition
[2019-04-07 16:52:45,636] WARN - Nextion component(s) global.fft1, global.fft2, global.fft3, global.fft4, global.fft5, global.fft6, global.fft7, global.fft8, global.fft9, global.fft10, global.audiol, global.audior, global.clock, global.mrpmbar1, global.mrpmbar2, global.rpmbar1, global.fuel, global.abs, global.turbobar, global.rpm, global.deltapbl, global.deltapbr, global.lastlapdel, laphistory.l1, laphistory.del1, laphistory.l2, laphistory.del2, laphistory.l3, laphistory.del3, laphistory.l4, laphistory.del4, laphistory.l5, laphistory.del5, telemetry.rpmgraph, telemetry.turbograph, system.volp, system.volm, printer.tmpbed, printer.tmphotend, printer.progressper, printer.remtime, gamevolumechanged.icon, gamevolumechanged.line1, gamevolumechanged.line2, rpmalerttriggerchanged.icon, rpmalerttriggerchanged.line1, rpmalerttriggerchanged.line2, sessionstarted.line1, sessionstarted.icon, newlap.line1, newlap.line2, newlap.line3, newlap.icon not found in nextion definition
[2019-04-07 16:52:45,636] INFO - Nextion mapping data file NextionTemplate\DASH_4.3599XX.HMISTRUCT loaded
[2019-04-07 16:52:45,640] INFO - Connecting to Nextion on COM31
[2019-04-07 16:52:45,796] INFO - Nextion connected on COM31 (115200bauds)
[2019-04-07 16:52:45,796] INFO - Setting touchmode on Nextion connected on COM31
[2019-04-07 16:52:45,797] INFO - Setting current page to 0 on Nextion connected on COM31
[2019-04-07 16:52:46,303] INFO - Creating Nextion worker, latency 20ms
[2019-04-07 16:52:49,293] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:52:49,462] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:52:50,528] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:52:50,675] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:52:52,097] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:52:52,327] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:52:54,064] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:52:54,231] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:52:55,654] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:52:55,801] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:52:56,975] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:52:57,122] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:52:58,461] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:52:58,628] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:52:59,653] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:52:59,821] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:53:00,763] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:53:00,909] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:53:01,976] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:53:02,165] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:53:03,189] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:53:03,833] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:53:04,152] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:53:06,098] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:53:06,265] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:53:07,227] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:53:07,394] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:53:08,295] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:53:08,441] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:53:09,550] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:53:09,717] INFO - Action 'NextionTemplateParser.nextion1_NextPage' triggered after input: NextionTemplateParser.nextion1_NextPage, JoystickPlugin.Arduino_Leonardo_1_B05
[2019-04-07 16:53:10,699] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:53:10,867] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:53:11,997] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:53:12,164] INFO - Action 'NextionTemplateParser.nextion1_PreviousPage' triggered after input: NextionTemplateParser.nextion1_PreviousPage, JoystickPlugin.Arduino_Leonardo_1_B00
[2019-04-07 16:53:19,666] INFO - Application exit
[2019-04-07 16:53:19,688] INFO - Stopping game manager
[2019-04-07 16:53:19,690] INFO - Stopping plugin manager
[2019-04-07 16:53:19,692] INFO - Saving plugin settings SimHub.Plugins.DataPlugins.DataCore.DataCorePlugin
[2019-04-07 16:53:19,693] INFO - SimHub.Plugins.DataPlugins.DataCore.DataCorePlugin plugin settings saved
[2019-04-07 16:53:19,693] INFO - Saving plugin settings SimHub.Plugins.DataPlugins.ShakeIt.ShakeItBassShakersPlugin
[2019-04-07 16:53:19,711] INFO - SimHub.Plugins.DataPlugins.ShakeIt.ShakeItBassShakersPlugin plugin settings saved
[2019-04-07 16:53:19,711] INFO - Saving plugin settings SimHub.Plugins.DataPlugins.ShakeIt.ShakeItPlugin
[2019-04-07 16:53:19,714] INFO - SimHub.Plugins.DataPlugins.ShakeIt.ShakeItPlugin plugin settings saved
[2019-04-07 16:53:19,714] INFO - Saving plugin settings SimHub.Plugins.DataPlugins.UDPRelay.UDPRelayPlugin
[2019-04-07 16:53:19,714] INFO - SimHub.Plugins.DataPlugins.UDPRelay.UDPRelayPlugin plugin settings saved
[2019-04-07 16:53:19,714] INFO - Saving plugin settings SimHub.Plugins.OutputPlugins.GraphicalDash.GraphicalDashPlugin
[2019-04-07 16:53:19,719] INFO - SimHub.Plugins.OutputPlugins.GraphicalDash.GraphicalDashPlugin plugin settings saved
[2019-04-07 16:53:19,719] INFO - Saving plugin settings SimHub.Plugins.OutputPlugins.Dash.SerialDashPlugin
[2019-04-07 16:53:19,720] INFO - SimHub.Plugins.OutputPlugins.Dash.SerialDashPlugin plugin settings saved
[2019-04-07 16:53:19,720] INFO - Saving plugin settings SimHub.Plugins.OutputPlugins.Nextion.NextionPlugin
[2019-04-07 16:53:19,722] INFO - SimHub.Plugins.OutputPlugins.Nextion.NextionPlugin plugin settings saved
[2019-04-07 16:53:19,722] INFO - Stopping plugin SimHub.Plugins.DataPlugins.DataCore.DataCorePlugin
[2019-04-07 16:53:19,722] INFO - Stopping plugin SimHub.Plugins.DataPlugins.PersistantTracker.PersistantTrackerPlugin
[2019-04-07 16:53:19,725] INFO - Stopping plugin SimHub.Plugins.AudioControl.AudioControlPlugin
[2019-04-07 16:53:19,775] INFO - Stopping plugin SimHub.Plugins.DataPlugins.Thrustmaster.ThrustmastersPlugin
[2019-04-07 16:53:19,776] INFO - Stopping plugin SimHub.Plugins.DataPlugins.SystemInfo.AfterburnerPlugin
[2019-04-07 16:53:19,777] INFO - Stopping plugin SimHub.Plugins.DataPlugins.SystemInfo.SystemInfoPlugin
[2019-04-07 16:53:19,777] INFO - Stopping plugin SimHub.Plugins.DataPlugins.ShakeIt.ShakeItBassShakersPlugin
[2019-04-07 16:53:19,777] INFO - Stopping plugin SimHub.Plugins.DataPlugins.ShakeIt.ShakeItPlugin
[2019-04-07 16:53:19,778] INFO - Stopping plugin SimHub.Plugins.DataPlugins.Shell.ShellPlugin
[2019-04-07 16:53:19,778] INFO - Finalizing plugin SimHub.Plugins.DataPlugins.Shell.ShellPlugin
[2019-04-07 16:53:19,778] INFO - Stopping plugin SimHub.Plugins.InputPlugins.JoystickPlugin
[2019-04-07 16:53:19,779] INFO - Stopping plugin SimHub.Plugins.DataPlugins.UDPRelay.UDPRelayPlugin
[2019-04-07 16:53:19,779] INFO - Stopping plugin SimHub.Plugins.DataPlugins.Logitech.HeadsetInfo
[2019-04-07 16:53:19,779] INFO - Stopping plugin SimHub.Plugins.KeyboardEmulator.KeyboardEmulatorPlugin
[2019-04-07 16:53:19,779] INFO - Stopping plugin SimHub.Plugins.OutputPlugins.GraphicalDash.GraphicalDashPlugin
[2019-04-07 16:53:19,780] INFO - Finalizing plugin SimHub.Plugins.OutputPlugins.GraphicalDash.GraphicalDashPlugin
[2019-04-07 16:53:19,780] INFO - Stopping plugin SimHub.Plugins.OutputPlugins.Dash.SerialDashPlugin
[2019-04-07 16:53:19,781] INFO - Stopping plugin SimHub.Plugins.OutputPlugins.Nextion.NextionPlugin
[2019-04-07 16:53:19,783] INFO - Stopping plugin SimHub.Plugins.Web.WebPlugin
[2019-04-07 16:53:19,783] INFO - Finalizing plugin SimHub.Plugins.Web.WebPlugin
[2019-04-07 16:53:19,783] INFO - Stopped all plugins
[2019-04-07 16:53:19,783] INFO - Performance dump
[2019-04-07 16:53:19,783] INFO - SimHub.Plugins.DataPlugins.PersistantTracker.PersistantTrackerPlugin:ataUpdate 2043calls 97ms 2043calls 0.000ms/call
[2019-04-07 16:53:19,783] INFO - SimHub.Plugins.OutputPlugins.Dash.SerialDashPlugin:ataUpdate 2043calls 54ms 2043calls 0.000ms/call
[2019-04-07 16:53:19,783] INFO - SimHub.Plugins.OutputPlugins.GraphicalDash.GraphicalDashPlugin:ataUpdate 2043calls 143ms 2043calls 0.000ms/call
[2019-04-07 16:53:19,783] INFO - SimHub.Plugins.DataPlugins.SystemInfo.AfterburnerPlugin:ataUpdate 2043calls 0ms 2043calls 0.000ms/call
[2019-04-07 16:53:19,784] INFO - SimHub.Plugins.DataPlugins.SystemInfo.SystemInfoPlugin:ataUpdate 2043calls 0ms 2043calls 0.000ms/call
[2019-04-07 16:53:19,784] INFO - SimHub.Plugins.DataPlugins.DataCore.DataCorePlugin:ataUpdate 2043calls 22ms 2043calls 0.000ms/call
[2019-04-07 16:53:19,784] INFO - SimHub.Plugins.Web.WebPlugin:ataUpdate 2043calls 51ms 2043calls 0.000ms/call
[2019-04-07 16:53:19,784] INFO - MultipleSerialDashPlugin::WorkerLoop 2043calls 1ms 2043calls 0.000ms/call
[2019-04-07 16:53:19,784] INFO - SimHub.Plugins.DataPlugins.ShakeIt.ShakeItPlugin:ataUpdate 2043calls 1ms 2043calls 0.000ms/call
[2019-04-07 16:53:19,784] INFO - SimHub.Plugins.AudioControl.AudioControlPlugin:ataUpdate 2043calls 18ms 2043calls 0.000ms/call
[2019-04-07 16:53:19,784] INFO - SimHub.Plugins.DataPlugins.ShakeIt.ShakeItBassShakersPlugin:ataUpdate 2043calls 27ms 2043calls 0.000ms/call
[2019-04-07 16:53:19,784] INFO - JoystickPlugin:ollThread 1723calls 27ms 1723calls 0.000ms/call
[2019-04-07 16:53:19,784] INFO - JoystickManager:etectJoysticks 1calls 112ms 1calls 112.000ms/call
[2019-04-07 16:53:19,784] INFO - SimHub.Plugins.OutputPlugins.Nextion.NextionPlugin:ataUpdate 2043calls 2ms 2043calls 0.000ms/call
[2019-04-07 16:53:19,784] INFO - SimHub.Plugins.DataPlugins.Thrustmaster.ThrustmastersPlugin:ataUpdate 2043calls 0ms 2043calls 0.000ms/call
[2019-04-07 16:53:19,784] INFO - Final Exit

 

[evolaco]

Then you do not have this problem?

 

[Wotever]

Then you do not have this problem?

No , I compared the timings it's pretty the same at few ms, I've not seen ghost inputs when reviewing your log, the only difference I see : I run in the new editor engine with the templates i've updated in the last release while you are still running with the old ini files.
Here is a direct link to the updated templates,could you give a try , it's the same only using the "editor" mode (hmijmap files) : https://www.dropbox.com/s/loptittxxo8ycuv/BuToNz - Nextion Template Pack v1.rar?dl=0
If it does not works I guess debouncing will be the only solution for your case

 

[evolaco]

No , I compared the timings it's pretty the same at few ms, I've not seen ghost inputs when reviewing your log, the only difference I see : I run in the new editor engine with the templates i've updated in the last release while you are still running with the old ini files.
Here is a direct link to the updated templates,could you give a try , it's the same only using the "editor" mode (hmijmap files) : https://www.dropbox.com/s/loptittxxo8ycuv/BuToNz - Nextion Template Pack v1.rar?dl=0
If it does not works I guess debouncing will be the only solution for your case

I have updated simhub to the latest version and have reloaded the templates and sketch, it has not been fixed.
I do not understand what it says of debouncing

 

[Wotever]

I have updated simhub to the latest version and have reloaded the templates and sketch, it has not been fixed.
I do not understand what it says of debouncing

It's something I can add to avoid too close page changes, like you suggested, but it's not really satisfying I agree .

Since with a similar setup it acts correctly, maybe some clues about power ? Do you have a robust power coming to the arduino ?
- No usb hubs or at worst a very (very) good one,
- Good quality cable (a bad cable can be enough to make it mad)
- The arduino jumper soldered as suggested ? (https://github.com/zegreatclan/SimHub/wiki/Nextion-Display#wiring-nextion-through-an-arduino-micro)
If you get a voltage drop when switching page it could explain it (I know that nextion have consumption peaks when changing pages.)

Maybe another idea about wiring : maybe the RX wire is not properly soldered on the arduino ? (display can work with only TX, except for a single thing, page changes. So a bad solder could be enough to change pages most of the time but miss some data from time to time and getting stuck

A last thing about templates : could you confirm you are now running with this option checked ?

Let me know, if all of that fails, I will look for adding a delay between pages changes when i will get back.

Just a short videos of my tests,I tried with both tactile and a button box :

 

[evolaco]

It's something I can add to avoid too close page changes, like you suggested, but it's not really satisfying I agree .

Since with a similar setup it acts correctly, maybe some clues about power ? Do you have a robust power coming to the arduino ?
- No usb hubs or at worst a very (very) good one,
- Good quality cable (a bad cable can be enough to make it mad)
- The arduino jumper soldered as suggested ? (https://github.com/zegreatclan/SimHub/wiki/Nextion-Display#wiring-nextion-through-an-arduino-micro)
If you get a voltage drop when switching page it could explain it (I know that nextion have consumption peaks when changing pages.)

Maybe another idea about wiring : maybe the RX wire is not properly soldered on the arduino ? (display can work with only TX, except for a single thing, page changes. So a bad solder could be enough to change pages most of the time but miss some data from time to time and getting stuck

A last thing about templates : could you confirm you are now running with this option checked ? View attachment 300304

Let me know, if all of that fails, I will look for adding a delay between pages changes when i will get back.

Just a short videos of my tests,I tried with both tactile and a button box :

Thanks for answering, I'm going to check all this, I use a USB hub, I'll test directly and measure the voltages, mark mapping does not solve the problem, if I use the screen to change the pages it sticks less, I'll try everything and tell you.
The option with delay I think it would be a good option for those who have problems like this, it would be another option for nextion, with 1 seconds it would be enough

 

[evolaco]

@Wotever to the nextion you get 3.95v and at the usb input 4.65v with the screen working, can I connect the red and black cable from the nextion to the usb input?

I've put it straight and now it's 4.65v but the problem persists, I'll have to try to remove the usbhub but I need it for my wheel ..

I have tried with the direct arduino and it continues to fail, the cables seem well soldered, I have tried different usb cables, I do not know what else it can be

 

[Tama93]

Hi, I use the headphones(frontal pin) and play to rbr, when i use simhub, after that i have finish the ps and return to desktop,it start a headphones noise and to make silence i must up or down the volume.
Can i help me?

 

[Wotever]

Hi, I use the headphones(frontal pin) and play to rbr, when i use simhub, after that i have finish the ps and return to desktop,it start a headphones noise and to make silence i must up or down the volume.
Can i help me?

Hi ! I know it sometimes happens due to the audio analysis for frequency bar graphs running in the background,could you try to disable the related plugin in simhub settings ?